Price: 4.95
Price: 39.95
Price: 8.95
Price: 18.95
Price: 19.95
Price: 20.95
Price: 21.95
Price: 64.95
Price: 18.95
Price: 9.95
Price: 12.95
Price: 16.95
Price: 51.95
Price: 16.95
Price: 3.95
Price: 32.95
Price: 27.95
Price: 12.95
SiteMap
| Glass Cutting Oil - 4 Oz. |
| Rinses Off Glass Cutting Oil is a water-soluble fluid developed especially for glass cutters. High lubricity fluid helps your glass cutter wheel roll smoothly for a good, continuous score. Plus, it rinses off easily with water. 4 oz.
Price: 4.95 |
| 3/4 Mika Elite Mirror Bit |
| Eliminate Glass Chipping. Standard grinder bits can chip the edges of mirror, flashed antique and other delicate glass. These bits virtually eliminate chipping, help to prevent mirror black edge, and can be used to add a decorative edge to any glass. The fine grit prevents chipping. Use this bit for decorative mirror edging or for edging ripple and rough textured glass. According to the manufacturer, the special design and fine grit diamonds virtually eliminate chipping and black edge on mirrors. The groove in the bit grinds at several angles at once, avoiding silver edge chips and helping to prevent mirror black edge.
Price: 39.95 |
| 8 X 8 Clear Acrylic Lens |
| This rugged 1/8 thick acrylic shield fits the Universal Face Shield Support, item 7340 (sold separately). Comes with protective film, peel off before use.
Price: 8.95 |
| 1/8 Diamond Tech Core Drill Bit |
| Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1/8. Works with a standard electric drill and only needs water as a lubricant.
Price: 18.95 |
| 1/4 Diamond Tech Core Drill Bit |
| Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1/4. Works with a standard electric drill and only needs water as a lubricant.
Price: 19.95 |
| 3/8 Diamond Tech Core Drill Bit |
| Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 3/8. Works with a standard electric drill and only needs water as a lubricant.
Price: 20.95 |
| 1/2 Diamond Tech Core Drill Bit |
| Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1/2. Works with a standard electric drill and only needs water as a lubricant.
Price: 21.95 |
| Score 1 Glass Cutter |
| The Score 1 is an amazing tool that makes glass cutting easy just adjust the height and pressure, then turn the dial. Scores glass evenly and cleanly every time. If you and 39;ve ever gotten an imperfect score line because your hand got tired or in an awkward position, this cutter is right for you. It exerts constant pressure, so you can concentrate on guiding the cutter head. You can even cut glass while sitting down. Carbide cutter head will last for years with normal use.
Price: 64.95 |
| 1 Diamond Tech Silver Bullet Fast Bit |
| For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.
Price: 18.95 |
| Thompson Klyr-fire - 16 Oz |
| A water-based adhesive used for enameling arts. Mix 50/50 with water for a spray adhesive. Use full strength for wet packing to hold enamels in place on curved pieces before firing or for adhering cloisonne wires.
Price: 9.95 |
| 1/4 Diamond Tech Silver Bullet Cap Bit |
| Silver Bullet bits are chrome hardened for performance, strength and durability. Standard replacement bit for all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5. For best performance and control use bit with Max Step Up Work Surface 7389.
Price: 12.95 |
| 3/4 Diamond Tech Silver Bullet Fast Bit |
| For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.
Price: 16.95 |
| 6 Kiln Collar Adaptor |
| Great for slumping and fusing taller objects in the 6 electric kilns like the Hot Box (item HB120) and the Jen-Ken Digital Fuse Box Kiln (item 68802). Collar sets on kiln base and top section of kiln rests on the collar (see inset photo below). Increasing the interior height by 2-1/2 enables you to fuse small vases and other taller projects. Note warm-up time is slightly greater due to larger area.
Price: 51.95 |
| Carefree Lusters Enamel Assortment |
| Add Sparkle with Carefree Lusters Discover the full rainbow of luster enamels with this trial set. Use Carefree Luster enamels with any glass project. Delphi instructors and students love adding lusters to their fusing projects for a beautiful look. Add it to your beads to create sparkling jewelry. Results in a metal flake or sparkle appearance. Trial pack contains 12 colors. Compatible with all glass. Approximately 2.5 gm. per color. Easter plate created by Delphi Fusing Expert and Instructor Stephanie Braman. Lampworked bead by Karan Dotson from 1000 Glass Beads, book 5988.
Price: 16.95 |
| Sifter For Enamels - 1/2 |
| This specially made tool is used to apply fine enamels. Lightweight plastic sifter features 80 mesh screen. Use for enameling and metal clay projects.
Price: 3.95 |
| Powder Enamel Assortment For Glass Fusing |
| Fuse with A Rainbow of Colors. Complete set of colored enamels includes 43 different colors of opaque and transparent enamel powder. 17 gm per color. Compatible with 90 COE and 96 COE. Matures between 1550 and 1650 degree F. Enamels can be sifted on projects, used with stencils, mixed with Klyr Fire 7405A1 and painted on. You can even use to write and draw on glass. Mix enamels with Liquid Stringer Medium 40900 and clear fine powdered frit. Apply with an applicator bottle. Project below from Contemporary Glass Enameling book 6629. Note For your safety wear an approved particulate mask, such as 5159 respirator, while handling powders.
Price: 32.95 |
| Powder Enamel Assortment For Bead Making |
| Add extra color to your beads with this Italian rod compatible 104 COE enamel set. Just sift the enamel on your bead, or roll the bead in the enamel (as shown in photo) for a burst of color. Set includes a mix of 4 transparent and 4 opaque enamels to use with 104 COE glass. Includes 1 ounce of each color. Step-by-Step Enamels See images below 1. Place a small amount of enamel on a graphite pad or other heat resistant work surface. 2. Gently roll the hot bead over enamel for desired effect. 3. Return the bead to the flame and heat bead evenly.
Price: 27.95 |
| Opaque Enamel Assortment For Metals |
| Add some exciting color to your metal art with this enamel assortment. Use for copper, gold, silver, steel and metal clay. Includes 10 colors of opaque enamels. 17 gm per color. First and second copper enameling projects below from Beginner and 39;s Guide to Enameling book 6553. Artist Dorothy Cockrell. Third project made with metal clay, texture sheets and enamels by Linda Bernstein. From PMC in Mixed Media book 6483.
Price: 12.95 |