Price: 44.95
Price: 23.95
Price: 23.95
Price: 23.95
Price: 35.95
Price: 21.95
Price: 32.95
Price: 32.95
Price: 41.95
Price: 41.95
Price: 33.95
Price: 33.95
Price: 33.95
Price: 41.95
Price: 21.95
Price: 14.95
Price: 44.95
Price: 21.00
SiteMap
| Graphite Steady Rest |
| For Ultimate Workshop Efficiency Set near your flame to create a rod warmer. Rest rods on the stepped base and position ends near the flame to gradually pre-heat glass while working with other beads. Slots allow you to move rods incrementally closer to the flame, saving you time and reducing the possibility of thermo-shock. Rest can also be used away from the flame to set hot glass or tools down safely.
Price: 44.95 |
| Graphite Table Top Mount Pedestal |
| Part of the Perfect Tool System for flameworkers. Table Top Mount rests securely on your table top, raising marvers 3 from the table. Attaches to interchangeable graphite marver plates, including Angled Groove 8658, Bicone 8657, Flat 8656 and Monster Masher 8659. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 as shown below or Table Top), then add interchangeable 2 x 3 graphite marver plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable grahite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Val Oswalt using the Angled Groove Marver 8658.
Price: 23.95 |
| Leaf Graphite Push Mold |
| Make Fun Shapes Fast Push molds offer a jump start on creativity. Simply press a gather of molten glass into the mold and you are left with a perfectly detailed shape. Creates a 3/4 x 1 x 1/4 thick leaf. Display it on its own, with other leaves, or use it in combination with flowers created in the Spiral Flower Push Mold 86514. Add a loop of glass to create pendants or buttons, or form beads on a mandrel. Create an entire series of sculptural glass pieces in an afternoon. Premium graphite mold is approximately 2 x 1/2 x 3/4. Project shown below created by glass artist Cere Carrington.
Price: 23.95 |
| Spiral Flower Graphite Push Mold |
| Make Fun Shapes Fast Push molds offer a jump start on creativity. Simply press a gather of molten glass into the mold and you are left with a perfectly detailed shape. Creates round flowers 7/8 x 3/8 thick. Add a loop of glass to create pendants or buttons, or form beads on a mandrel. Create an entire series of sculptural glass pieces in an afternoon. Premium graphite mold is approximately 2 x 1/2 x 3/4. Project shown below created by artist Cere Carrington.
Price: 23.95 |
| 2 In 1 Graphite Pendant Push Mold |
| Make Fun Shapes Fast Push molds offer a jump start on creativity. Simply press a gather of molten glass into the mold and you are left with a perfectly detailed shape. Versatile two in one mold creates a critter body 5/8 x 1 x 5/16 (see spider project below by artist Cere Carrington) and a pendant 3/4 x 1 x 7/16 thick (as shown above). Add a loop of glass to create pendants or buttons, or form beads on a mandrel. Create an entire series of sculptural glass pieces in an afternoon. Premium graphite mold is approximately 2 x 1/2 x 3/4. Projects shown below created by glass artist Cere Carrington using this mold.
Price: 35.95 |
| Acorn Graphite Push Mold |
| Make Fun Shapes Fast Push molds offer a jump start on creativity. Simply press a gather of molten glass into the mold and you are left with a perfectly detailed shape. Creates round acorn pieces 3/4 x 3/8 thick. Add a loop of glass to create pendants or buttons, or form beads on a mandrel. Create an entire series of sculptural glass pieces in an afternoon. Premium graphite mold is approximately 2 x 1/2 x 3/4. Project shown above created by artist Cere Carrington.
Price: 21.95 |
| Groove Flower Graphite Push Mold |
| Make Fun Shapes Fast Push molds offer a jump start on creativity. Simply press a gather of molten glass into the mold and you are left with a perfectly detailed shape. Creates round flowers 1 x 1/2 thick. Add a loop of glass to create pendants or buttons, or form beads on a mandrel. Create an entire series of sculptural glass pieces in an afternoon. Premium graphite mold is approximately 2 x 1/2 x 3/4. Project shown above created by artist Cere Carrington.
Price: 32.95 |
| Open Weave Graphite Push Mold |
| Make Fun Shapes Fast Push molds offer a jump start on creativity. Simply press a gather of molten glass into the mold and you are left with a perfectly detailed shape. Creates round pieces 1-1/4 x 1/2 thick. Add a loop of glass to create pendants or buttons, or form beads on a mandrel. Create an entire series of sculptural glass pieces in an afternoon. Premium graphite mold is approximately 2 x 1/2 x 3/4. Project shown above created by artist Cere Carrington.
Price: 32.95 |
| 3-in-1 Marble Push Mold |
| Part of the Perfect Tool System for flameworkers. The marble push mold gives you three molds in one. Make perfectly shaped marbles 3/8, 1/2 and 5/8 in diameter. The image above shows the top of the press plate. The bottom has an extended plus sign that securely fits either the Torch Mount 8655 or the Table Top Pedestal Base 86511 to keep the plate stable as the glass is worked. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 or Table Top 86511), then add interchangeable graphite marver or press plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable graphite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Val Oswalt using the Marble Mold Plate.
Price: 41.95 |
| Graphite 4 In 1 Optic Mold |
| Get the Value and Covenience of Four Tools in One. Graphite optic mold features four popular shapes in one handy tool. Ideal for making murrini and striped cane. Premium professional design and material. Overall size 3 x 3. Individual designs about 5/8 diameter each. Delphi expert Cere Seddon created the project below using this 4-in-1 optical mold.
Price: 41.95 |
| 4-in-1 Splat Press Mold |
| Part of the Perfect Tool System for flameworkers. Create four 1/16 deep splat shapes, 1/9, 5/8, 3/4 and 7/8 in diameter. The image above shows the top of the press plate. The bottom has an extended plus sign that securely fits either the Torch Mount 8655 or the Table Top Pedestal Base 86511 to keep the plate stable as the glass is worked. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 or Table Top 86511), then add interchangeable graphite marver or press plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable graphite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Cere Seddon using the Splat Press Plate.
Price: 33.95 |
| 4-in-1 Leaf Press Mold |
| Part of the Perfect Tool System for flameworkers. The leaf gives your four contemporary, nature inspired shapes in one. It and 39;s four 1/16 deep shapes, 9/16, 5/8, 3/4 and 7/8 in diameter. The image above shows the top of the press plate. The bottom has an extended plus sign that securely fits either the Torch Mount 8655 or the Table Top Pedestal Base 86511 to keep the plate stable as the glass is worked. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 or Table Top 86511), then add interchangeable graphite marver or press plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable graphite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Cere Seddon using the Leaf Press Plate.
Price: 33.95 |
| Spiral & Oval Press Combo |
| Part of the Perfect Tool System for flameworkers. The spiral and oval bead press gives you two shapes in one. The image above shows the top of the press plate. The bottom has an extended plus sign that securely fits either the Torch Mount 8655 or the Table Top Pedestal Base 86511 to keep the plate stable as the glass is worked. Oval measures 1/2 wide by 3/4 tall. Circle measures 7/8 wide x 3/4 tall. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 or Table Top 86511), then add interchangeable graphite marver or press plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable graphite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Cere Seddon using the Spiral and Oval Press Combo Plate.
Price: 33.95 |
| Focal Roller Push Mold |
| Part of the Perfect Tool System for flameworkers. Using this press, you can create focal rollers. Plate is 2 x 4. It fits a 1/8 mandrel. Rounded cavity is 2-3/8 wide by 7/8 high and ranges from 1/16 to 1/4 deep. The image above shows the top of the press plate. The bottom has an extended plus sign that securely fits either the Torch Mount 8655 or the Table Top Pedestal Base 86511 to keep the plate stable as the glass is worked. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 or Table Top 86511), then add interchangeable graphite marver or press plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable graphite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Artist Val Oswalt used the Focal Roller to create the streaky red bead below.
Price: 41.95 |
| Graphite Frit Tray |
| Use Graphite Tools for Professional Results Spread frit evenly in the tray and you are ready to roll. Use with mica powders, enamels, frit and foil for even embellishment coverage on glass beads. Premium recessed graphite tray keeps materials from sliding and makes clean up quick and easy. 2 x 2-3/4 x 1/2 deep.
Price: 21.95 |
| Graphite Frit Spoon |
| Apply embellishments to beads quickly and uniformly. Simply roll molten glass in the scoop. When finished with one color, pour unused frit or enamel back into the container. No fuss, no mess. It and 39;s an incredibly handy and quick way to switch out colors at the torch and keep your workshop clean and organized Premium graphite, professional design. 1 diameter x 5 long x 1/2 handle.
Price: 14.95 |
| Graphite Torch Mount Base |
| Part of the Perfect Tool System for flameworkers. Torch Mount Base fits torches up to 1-1/4 diameter and attaches to interchangeable graphite marver plates, including Angled Groove 8658, Bicone 8657, Flat 8656 and Monster Masher 8659. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount as shown above or Table Top 86511), then add interchangeable 2 x 3 graphite marver plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable grahite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Val Oswalt using the Angled Groove Marver 8658.
Price: 44.95 |
| Flat Graphite Marver Plate |
| Part of the Perfect Tool System for flameworkers. 2 x 3 flat marver is a handy tool for picking up foil, powders and other embellishments, and as a flat surface for rolling and shaping. The image above shows both the top and bottom of the marver. The bottom has an extended plus sign that securely fits either the Torch Mount 8655 or the Table Top Pedestal Base 86511 to keep the plate stable as the glass is worked. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 or Table Top 86511), then add interchangeable 2 x 3 graphite marver plates, including the one shown here. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable graphite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Val Oswalt using the Flat Marver.
Price: 21.00 |